User guide

16 AutoView 200/400 Installer/User Guide
Installing a Multiple Switch System
The following diagram illustrates one possible cascading configuration using
your AutoView switch. Perform this installation if you want to add another
switch to your existing system. Follow the step-by-step instructions to properly
cascade your new AutoView switch.
Figure 2.5: Multiple Switch Installation Example
REMOTE
USER
I/O
LOCAL USER
SETUP
SUN
AC E G
BD F H
100-240V , .1A, 50/60 Hz
REMOTE
USER
I/O
LOCAL USER
SETUP
AC E G
BD F H
100-240V , .1A, 50/60 Hz
AutoView 400
Primary Switch
DB9 serial port
for updating
firmware
AutoView 200
Secondary Switch
Local
User
Server A
Servers B-H
Servers B-H