Service manual

Cybex Free Weight Owner’s Manual

Assembly

Page 5-13

8. Attach bottom support bar (see steps 8A and 8B and Figure 12).

Position bottom support bar (#13) between right and left side attachments (#19 and #20).

Secure bottom support bar (#13) to right and left side attachments (#19 and #20) using two

lockwashers .50 (#18), two hex nuts .50-13 (#15), two SHCS .50-13 x 1.00 (#16) and two plastic

inserts 1.19 Dia. (#6). See Figure 12.

9. General anchoring guidelines (see steps 9A and 9B).

NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional

contractor.

Use fasteners having a minimum of 500 lbs tensile capacity (3/8” grade 2 bolt or better).

If all legs/frames do not contact surface, DO NOT pull down with anchors. Shim any leg or

frame (with ﬂ at washers) not in contact with surface.

Figure 12