Manual
35
Slightly fold the stroller to reduce tension.
Remove the canopy from the stroller, if
attached.
Remove the seat cover hooks (3) from
both sides of the frame.
Open the press buttons (4) of the two
straps connecting the seat side panels
with the rear tube.
velcro covering both sides of the seat
Feed the strap with the slider (6) of the
central harness buckle through the hole
in the seat fabric.
Feed the loops at the end of the shoulder
straps through the triangle in the backrest
(7).
Feed the shoulder straps through the holes in the seat fabric (8).
the underside of the seat unit.
Pull the seat cover over the harness adjustment button of the seat.
Slide the fabric from the seat base tubes.
tubes slide back into the pockets inside the seat cover.
12. REMOVING THE SEATCOVER
a)
EN