User's Manual

LCD DISPLAY

Backlit LCD Display

Both the handset and the base unit have the backlit LCD display. It will light when you

start using the handset or the base unit, or when a call is received. The display light will

stay on for a few seconds after pressing a button or lifting the handset off the base unit.

Backlit Keypad

The num eric keys will light when you press a key or when a call is received. The light

will stay on for a few seconds after pressing a key or answering a call.

DATA PORT

You can connect a com m unication device (like

com puter, m odem , fax m achine, answering

m achine, and etc) through this unit using the

DATA jacks at the bottom of the base unit.

You could choose to connect the com m unication

device to Line 1 or Line 2 with the jacks labeled

“L1 Data” or “L2 Data” respectively. However, if

you have 2 telephone lines occupied the jacks

“L1 only” and “L2 only”. Then your com m unication device can only be connected to

Line 1 via the jack labeled “L1 & L2”. SEE PAGE 16 FOR DETIALS OF TELEPHONE

LINE(S) CONNECTION

Note: Make sure the data device is not in use prior to using your phone or else the data

device may not be operated properly. W hile data transm ission is in progress, use of the

sam e line on your SBC373 or a Call W aiting ID alert m ay interrupt the transm ission.

Caller’s Nam e

Caller’s Num ber

Calling Date

& Tim e

Sequence in caller list

Labels of 5 softkeys

I MP O R T AN T IN FO R MAT IO N