User's Manual

14
QUICK REFERENCE
Task Steps Page
12 Page from base to
handset(s)
1. Press [Int./Page].
2. Pres
s the desired handset num ber [1] to
[8] or [] / [#] for all handsets.
3. To term inate the paging, press [EXIT]
softkey or [Int./Page] or [Bye] key.
31
13 Intercom call between
two handsets
1. Press [Int.].
2. Press the desired handset num ber.
3. To term inate the paging, press [EXIT]
softkey or [Int./Page] or [Bye] key.
46
14 Intercom call from a
handset to the base unit
1. Press [Int.]
2. Press [0] to access the base unit.
3. To term inate the paging, press [EXIT]
softkey or [Int./Page] or [Bye] key.
46
15 Call Transfer 1. Press [Int.] on handset or [Int./Page] on
base unit while engaging in an external
line.
2. Press the desired handset num ber or
press [0] for the base unit.
3. Press corresponding LINE key on
handset or on the base unit to take back
the call at any point, or the call will be
returned to you if it is not answered
within 20 seconds.
47
16 Truly 2-line conference
call
1. W hile m aking or answering a call on
Line1 or Line2
2. Press [HOLD] softkey either on the
handset or the base unit to put the call
on hold
3. Make or answer a second call on the
other line
4. After the second call is connected,
press [Conf.] / [Conference] to add the
first caller into the conference call
5. To end the conference call, press a
LINE key to retain the party on that line
and drop the other one, or just press
[Bye] to end both lines.
35
I MP O R T AN T IN FO R MAT IO N