User's Manual

30
Pre-dial
Pre-dial allows you to key-in the phone num ber and verifies it before dialing.
Dial the phone num ber.
To edit the num ber on the display, press [DELETE] to
clear the last digit. To clear the entire num ber, press
[EXIT].
Press [Spk.] on the handset or a LINE key on the
handset or base unit to dial the num ber. The call
tim er will start counting.
Press [Bye] on the handset or [Bye] on the base unit to
end your call.
Note: If one line is engaged by the handset, pre-dial with another line on the Base Unit
cannot be used. Only direct dial is possible.
ANSW ERING A CALL
From the Handset
Press the appropriate LINE key as displayed, or [Spk.] to
answer. If the phone is set to Auto Answer m ode and
the handset is on the charging cradle, you can answer a
call by lifting the handset off the base unit, or the
charging cradle, without pressing any key.
To end the call, press [Bye].
From the Base Unit
Press the appropriate LINE key to answer. To end the call, press [Bye].
Note: Two calls can be handled sim ultaneously on separate telephone lines by the
handset and the base unit, or by two handsets.
TO REDIAL A CALL
Directly Redial Last Dialed Num ber
Press a LINE key / [Spk.] on the handset or a LINE key
on the base unit and listen for the dial tone.
1234568
O.K. EXIT DELETE
SAVE
L1 ON
1234568
00:01
HOLD
3W AY
SERVICE
L1 ON
1234568
00:01
HOLD
3W AY
SERVICE
L1 ON
HOLD
SERVICE DIR. DIAL V.M.
BAS IC O PE RAT IO N