User's Manual

FLASH

Call W aiting

1. Use [Flash] for accessing Call W aiting service. For exam ple, if you receive a

second call during your initial call, press [Flash] to swap to the waiting call and put

the initial caller on hold.

2. After you finish the conversation with the second caller, press [Flash] to return to the

first caller.

Note: If you also have conference Calling service, press [Flash] to allow the first caller

enter into a conference call.

PAUSE

The [Pause] key allows you to add a 3-second pause in a phone num ber sequence

during pre-dialing or storing num ber in the Phone Book Directory.

Enter a Pause in Dialing Sequence

To add a pause, press [Redial/P] at the desired position when you are creating or

editing a phone number and “ P ” appears on the display. For a longer delay, press

[Pause] additional tim es.

Note: Rem em ber, the phone num ber you wish to store cannot have more than 32 digits,

including any pause. Each “ P ” counts as one digit.

HOLD

A call can be put on hold during conversation to allow you to m ake a separate phone call

using the other line or to be picked up by another handset.

W hen engaging an external line on the handset, press

[HOLD] softkey.

W hen the line is on hold, “L1 HOLD” is appeared on

the handset display. The Line in use indicator in the

base unit will keep flashing

Note : The call can be picked up by the base unit or any handset registered to the sam e

base unit by pressing the corresponding LINE key..

L1 ON

HOLD

SERVICE DIR. DIAL V.M

L1 HOLD

HS- 1

08:30

7/04

SAVE S ERVICE MENU DIR. DIAL V.M

ADVAN CE D O PE RAT IO N