User's Manual

14
QUICK REFERENCE
Task Steps Page
12 Paging from base unit to
handset(s) or from
handset to the base unit
1. Press [Int./Page].
2. Use [▼] / [▲] to select the desired
handset or all handsets and press [O.K.]
to page.
3. If the handset is set to “Intercom auto
answer,” it will answer automatically in
speakerphone mode.
4. To stop the paging, press [EXIT] softkey
or [Int./Page] again.
32
13 Intercom call between 2
handsets
1. Press [Int.].
2. Use [▼] / [▲] to select a handset and
press [O.K.] to page it.
3. To stop the paging, press [EXIT] softkey
or [Int.].
48
14 Blind call transfer 1. During an external call, press [Int.].
2. Use [▼] / [▲] to select the handset (or
base unit) to which the call is to be
transferred.
3. On the recipient, press [O.K.] softkey or
[Talk] to take the transferred call.
49
15 Announced call transfer 1. During an external call, press [HOLD]
softkey to put the call on hold.
2. Press [Int.] and scroll to the desired
recipient and press [O.K.] to page.
3. On the recipient, press [Int.], [O.K.] or
[Talk] to answer the intercom.
4. After the intercom conversation, the
recipient presses [Talk] to take the
external call.
49
IMPORTANT INFORMATION