User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
15
QUICK REFERENCE
Task Steps Page
16 Multiple handset
conference
While a handset is engaged in an external
call, another handset(s) can press [Talk] to
join the conversation. The maximum
number of parties in the conference is 5: 3
handsets, the base unit and 1 external call.
50
17 Room monitoring On the handset in the room to be
monitored:
1. Press [MENU] softkey.
2. Scroll to “MONITOR ROOM” and press
[O.K.]. The handset will display
“ READY TO ROOM MONITORING”.
On the handset (or the base unit) used for
monitoring:
1. Press [Int.].
2. Use [▼] / [▲] to select the handset in
the room to be monitored and press
[O.K.] to start.
The link is automatically set up. During the
monitoring, the communication is only
one-way.
To end the monitoring, press [EXIT] softkey
or [Int.] on either side.
37
18 Walkie-talkie mode
Two or more handsets
entered into walkie-talkie
mode can communicate
with each other totally
independent of the base
unit when they are within
range of each other.
To enter into walkie-talkie (FRS) mode on 2
handsets:
1. Press [MENU] softkey.
2. Use [▼] / [▲] to select
‘WALKIE-TALKIE’.
3. Press [O.K.] to confirm the selection
and the LCD shows “WALKIE-TALKIE”.
To operate as walkie-talkie (FRS):
1. Press [Int.] on either handset.
2. Key in the number of the other handset
that is in walkie-talkie mode. The called
handset can answer by pressing [Talk],
[Int.] or [O.K.].
51
IMPORTANT INFORMATION