User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
21
Short tab
Long tab
WALL MOUNTING BASE UNIT
The base unit can be mounted on a wall phone plate by using the supplied Wall
Mounting bracket.
1. Bring the barrel plug of the AC adaptor through
the rectangular opening of the Wall Mounting
bracket.
2. Plug the AC adaptor’s barrel plug into the jack
marked “500mA DC 7.5V” at the back of the
base unit and press the cord into the slot above
the jack.
3. Bring the telephone line cord through the rectangular
opening of the Wall Mounting bracket and plug it into
the jack marked “TEL LINE”.
4. Insert 2 long tabs and 2 short tabs of the Wall
Mounting bracket into the slots at the back and
bottom of the base unit simultaneously.
5. Press the Wall
Mounting bracket
against the base
unit until they are
resting firmly on
each other.
6. Hold the base unit up next to the wall jack and plug
the line cord into the wall jack. Any extra line cord
can be hidden inside the Wall Mounting bracket.
7. Place the base unit on the posts of the wall plate and push down until the unit is
secured firmly.
8. Plug the AC adaptor into a standard wall outlet.
Note: If you are not using a standard wall plate to mount the phone on wall, you may also
mount it with ordinary screws. Use the Wall Mounting Template on page 59 to affix two
screws at your desired location. Remember to leave 1/8 inch of the screw extending from
the wall.
Please charge new batteries for at least 15 hours prior to initial use.
GETTING STARTED