User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
27
Use [▼] / [▲] to select Call Waiting ID Options “ON” or
“OFF”.
Press [SAVE] to confirm, and then press [EXIT] to return
to stand-by.
Note: Call Waiting ID Options may be available from your telephone company.
Subscription may be required.
New Call Lamp
If the Message Waiting Indicator / New Call Lamp is switched ON, the light will flash
when there are new or unviewed Caller ID entries in call log
Press [MENU] softkey.
Use [▼] / [▲] to access “NEW CALL LAMP”.
Press [O.K.] to enter into the selection.
Use [▼] / [▲] to switch the New Call Lamp “ON” or “OFF”.
Press [SAVE] to confirm, and then press [EXIT] to return
to stand-by.
Audible (Voice Announce) Caller ID (Only available in base unit menu)
Press [MENU] softkey.
Use [▼] / [▲] to access “AUDIBLE CID”.
Press [O.K.] to enter into the selection.
Voice Announce Caller Name (Audible Name)
Use [▼] / [▲] to access “AUDIBLE NAM :”.
The default volume level for Audible Name is “3”.
Press [OFF / 0-5] to adjust the voice announcement
volume to your desired level.
Use
[▼] to access “AUDIBLE NUM :”
Voice Announce Caller Number (Audible Number)
The default volume level for Audible Number is “3”.
Press [OFF / 0-5] to adjust it to your desired level.
Press [SAVE] to confirm and then press [EXIT] to return
to stand-by.
Note: When the volume level is set to “OFF”. The corresponding announcement is
disabled. The phone will cease to make audible announcement.
Time and Date Setting
Press [MENU] softkey.
Use [▼] / [▲] to select “SET DATE/TIME”.
Press [O.K.] to enter into the selection.
Enter the current time and then press [▼] / [▲].
CW ID OPTION
v
ON
USE K L =CHANGE
EXIT
SAVE
NEW CALL LAMP:
v
ON
USE K L =CHANGE
EXIT
SAVE
AUDIBLE CID
RINGER & BEEP
USE K L =REVIEW
O.K. EXIT
AUDIBLE NAM : 3
AUDIBLE NUM : OFF
USE [0 - 5] = VOL
. EXIT DELETE
SAVE
AUDIBLE NAM : 4
AUDIBLE NUM : OFF
USE [0 - 5] = VOL
. EXIT DELETE
SAVE
TIME :
v
10:05 (AM)
[EDIT] → AM/PM
EDIT O.K. EXIT
SAVE
INITIAL SETTINGS