User's Manual

44
If this is done on the base unit, after 2 seconds, the LCD
will prompt you to record a name for Voice Announce to
associate with the number. (Refer to the section
‘Recording Voice Announcement Name’ on page 45 for
details)
Press [EXIT] to decline the name recording.
Adding a New Number/Name
Press [DIR.] softkey during stand-by mode. Select a
directory with [JOIN] or [O.K.] softkey. “EMPTY LIST”
appears if no records in the directory, or “# ITEMS”
identifies how many records are in the directory. If the
directory is full, the message “LIST FULL” will appear and
your request is rejected.
Press [SAVE]. Enter the number.
Tip: 1. Press [Pause] to add a 3-second delay (pause)
in the number field, and P is displayed.
2. Press [Flash] to add a flash in the number field.
F is displayed.
After entering the number, press [O.K.] and “NAME:” is
displayed.
Use the numeric keys to enter the name. If you make a
mistake, press [DELETE] and re-enter.
Then press [SAVE] to save it.
After that, the LCD will prompt you whether assigning a
distinct ring for this entry. Press [EXIT] to save and quit
without selecting a distinctive ring, or press the [O.K.] to
select a ring tone. Use [▼] / [▲] to scroll through the list
and select a desired one.
Press [SAVE] to save your setting.
Note: Distinct Ring is only available in Personal Directory.
If you want to record a name for Voice Announce, see
next section. Or press [EXIT] to decline the name
recording.
JOHN SMITH
1234567 #38
RECORD?
O.K. EXIT
PERSONAL DIR.
EMPTY LIST
USE SAVE = +NEW 
EXIT
SAVE
NUMBER: L
1F23P45_

O.K. EXIT DELETE
NAME: v
JOHN SMITH

EXIT DELETE
SAVE
ROMANCE v
BEETHOVEN
 SAY HELLO 
EXIT
SAVE
JOHN SMITH
1234567 #38
RECORD?
O.K. EXIT
PHONE DIRECTORY