User's Manual
Table Of Contents
- Caller ID / Call Waiting Type 2.5 with Call Waiting ID Deluxe
- with
- VOICE ANNOUNCE
- Important Safety Instructions:
- SPECIAL FEATURES
- CHOOSING THE BEST LOCATION
- LOCATION OF CONTROLS
- LCD DISPLAY
- DATA PORT
- QUICK REFERENCE
- CHARGING THE BATTERY PACK
- CONNECTING THE BASE UNIT
- REGISTRATION & DE-REGISTRATION OF HANDSET
- CHOOSING THE DIALING MODE
- WALL MOUNTING BASE UNIT
- STRUCTURE AND OPTIONS
- Naming
- Language
- Ringer & Beep
- Answer Mode (Only available in handset menu)
- Contrast
- Call Waiting ID Deluxe (Call Waiting ID Options)
- Call Waiting ID Deluxe / Call Waiting ID Options provide options for handling a waiting call. 5 dedicated softkey labels appear when there is an incoming waiting call.
- New Call Lamp
- Audible (Voice Announce) Caller ID (Only available in base unit menu)
- Time and Date Setting
- Intercom Setup
- Message Waiting Indicator
- MAKING A CALL
- ANSWERING A CALL
- REDIALING A CALL
- ADJUSTING HANDSET RECEIVER VOLUME
- MUTING A CALL
- PAGING and INTERCOM
- SETTING ALARM
- USING HANDSET SPEAKERPHONE
- INSTALLING AND USING HEADSET
- FLASH
- PAUSE
- HOLD
- SENDING TONE SIGNALS IN PULSE DIALING MODE
- DIAL VOICE MAIL
- DIALING BACK FROM CALLER ID LIST
- DAILING FROM PHONE DIRECTORY
- CONFERENCE CALL
- ROOM MONITORING
- ABOUT CALLER IDENTIFICATION
- CALLER LIST
- VOICE ANNOUNCE CALLER ID
- CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
- CREATING A PHONE DIRECTORY RECORD
- RECORDING VOICE ANNOUNCE NAME (Only available on base unit)
- REVIEWING PHONE DIRECTORY
- EDITING A PHONE DIRECTORY NUMBER
- DELETING AN ENTRY FROM A PHONE DIRECTORY
- Deleting all phone directory records
- DIALING FROM THE PHONE DIRECTORY
- INTERCOM
- CALL TRANSFER
- CALL CONFERENCING
- WALKIE-TALKIE OPERATION
- DIALING SERVICES
- CAPACITY
- OUT OF RANGE
- NO CONNECTION
- WHAT DOES OUR WARRANTY COVER?
- FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
- HOW DOES STATE LAW OR LOCAL LAW RELATE TO THIS WARRANTY?
48
Your new cordless phone system has multiple handset capability that supports up to 4
(CY-381A-VT) handsets. Each additional handset comes with a charging cradle that you
can plug into any electrical outlet. No extra phone jack is required. Many extra functions
become possible when there are additional handsets in your system. To register the
additional handsets to the base unit, see page 18. To order additional handsets, call
Customer Service at 1-800-988-7728.
INTERCOM
The base unit can support the intercom conversation and the external call simultaneously.
Handset-to-handset 2-way intercom is operated independent of the base unit. It is
possible to make an intercom call between two handsets while another handset is
engaged with the external call.
When a handset (HS) is in stand-by mode, press [Int.]
key. The LCD will show the base unit and all the other
available handsets in range of the base unit.
Use the [▼] / [▲] keys to move to the handset you want
to intercom with and then press [O.K.]. For instance, if HS
(2) is being paged by HS (1), then HS (1) LCD shows
“PAGING HS (2)”
Handset (2) will ring and display “PAGING FROM HS
(1)”.
On the paged handset, press [Talk], [Int.] or [O.K.] to
answer the intercom.
If you do not want to answer, press [EXIT] softkey and
the ringing will stop.
Note:
This phone system can allow you to conference or intercom by using the handset and
base unit simultaneously. If the handset is operated too close to the base unit, you may
experience feedback noise. Should this occur, simply move the handset away from the
base unit.
INTERCOM
HS (2) L
BASE
O.K. EXIT
PAGING
HS (2)
EXIT
PAGING FROM
HS (1)
O.K. EXIT
INTERCOM
HS (2) HS (1)
VOL-2
EXIT
MULTI-HANDSET OPERATION