Instructions / Assembly

Practice in particular going round bends, uphill and downhill gradients, braking in an
emergency and starting off with the trailer on the back of the bicycle,
on different road surfaces.
29. Fit the supplied pennant to make the bicycle and trailer more noticeable.
30. Before setting off with the bicycle and trailer, make sure that there is sufficient air pressure
in the tyres, because inadequate air pressure in the tyres can change the behaviour of the
bicycle and trailer.
31. When the trailer is connected up, there is an increased risk of the bicycle itself tipping over
when at a standstill. Particularly when the luggage rack is full, make sure that the bicycle
stands in a stable position (great care is advised especially when using a child seat).
In this case we recommend a double stand.
Step 1: Parts List: below picture shows the accessory parts which belong to this
product:
Jogger kit(with knob screws),handlebar(with bracket set),trailer body, top cover,
support bar(with screws), two wheels.
Please note that towing bar folded under trailer body, see below picture.