User's Manual

37
M6
Settings – start altitude
Once the correct start altitude has been set,
confirm the setting by pressing the SET button.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M6 returns to function mode.
Settings – current altitude
The current altitude can be set on the M6.
The current altitude is set, for example, if you are not starting
from either of the two set start altitudes or you encounter
altitude information on a pass that differs from the current
altitude displayed on your M6.
The current altitude can be specified in metres/feet or as
sea level pressure. The sea level pressure information can be
obtained from several weather websites.
How to set the current altitude:
Press and hold the SET button until the settings menu
opens.
Press the BIKE button to move from Memory to
Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE or TPC button to scroll to the setting for the
Actual altitude.
Press the SET button to open the setting for the
Actual altitude.