User's Manual

44
M6
Settings – switching the beeper on or off
On the M6, you can switch the beeper for the heart rate
warning on or off.
How to set the beeper:
Press and hold the SET button until the settings menu
opens.
Press the BIKE button to move from Memory to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE or TPC button to scroll to the settings
for the Beeper.
Press the SET button to open the settings.
Press the BIKE or TPC button to select whether the
beeper should be switched on or off.
Press the SET button to confirm the setting.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the BIKE or TPC button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M6 returns to function mode.