User's Manual

56
M6
Settings – total values – distance uphill
In the M6, you can set the distance travelled uphill separately
for bike 1 and bike 2, for example at the start of the new
cycling season.
ATTENTION: the M6 stores all total values even if you
replace the batteries. No data is lost.
How to set the distance travelled uphill:
Press and hold the SET button until the settings menu
opens.
Press the BIKE button to move from Memory to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE or TPC button to scroll to the settings
for the total values.
Press the SET button to open the settings.
Press the BIKE or TPC button to scroll to the setting
Dist Up (distance travelled uphill).
Press the SET button to open the settings.
Press the BIKE or TPC button to select whether you want
to configure the setting for bike 1 or bike 2.
Press the SET button to confirm your selection and open
the setting.
The left digit flashes. Press the BIKE or TPC button
to set the value for this digit.
Press the SET button to confirm your setting.