User's Manual

C1DS

C2DS

C3DS

C4DS

2.2 Mounting transmitter and magnet >>> P03

important mounting instructions:

a) maximum distance transmitter – computer = 150 cm (59 in)

b) distance transmitter - magnet: 3 to max 10 mm (up to 0.04 in)

c) mount the transmitter on the fork leg, same side where you want the computer to be on the

handlebar. (not applicable for stem mounting with optional stem holder).

Step 1 Preﬁx the transmitter on the fork leg with cable ties (do not tighten yet)

Step 2 Put the magnet around a spoke, do not ﬁx

Step 3 Direct the magnet to the marking on the transmitter at a distance of around 3 mm and

shut the clip-mechanism

Step 4 Align transmitter and magnet and tighten the transmitter’s cable ties. Clip off the cable

tie ends not needed.