User's Manual

∂ ƒ Set rst digit (keep button depressed for fast run-

through)

‚ NAVIGATOR SET DONE

Automatic return to the operation mode for NAVIGATOR

12.2. RESETTING THE NAVIGATOR AT THE ORIENTATION POINT

3 sec. √ TRIP DATA ?RESET?

∂ ƒ NAVIGATOR ?RESET?

‚ NAVIGATOR ?RESET? <<?RESET?>> ashes

‚ NAVIGATOR RESET DONE

Automatic return to the operation mode for NAVIGATOR

Navigator reset done

13. THE TIMING FUNCTIONS

The following settings are of particular importance when using the

pulse functions (chapter 14.).

Your VDO computer has 6 different timing functions. If one of the timing

functions is running the TIMING indicator icon will always be ashing

in the left part of the display. Moreover the residence times in the trai-

ning ranges are captured for each running timing function (see chapter

Kap. 14). The setting range/measuring range for all timing functions is

0:00:00 h to 24:00:00 h

TIMER 1: You can program a time e.g. for interval training. TIMER 1

counts from zero forward. At the end of TIMER 1 there is a single beep.

Timer 1 only functions if you have set a time. If you have forgotten to

set a time your VDO computer displays TIMER ERROR

TIMER 2: You can program a time, e.g. for the rest phase in an interval

training. TIMER 2 counts from zero forward. At the end of TIMER 2 there

are two beeps. Timer 2 only functions if you have set a time. If you have

forgotten to set a time your VDO computer displays TIMER ERROR

TIMER 1+2 runs until you stop these functions. Timers 1 + 2 only

function if you have set a time. If you have forgotten to set a time your

VDO computer displays TIMER ERROR.

COUNTDOWN: You can program a time, the timer will count backwards

from this time. At the end of the COUNTDOWN time there is a single

beep. Countdown only functions if you have set a time. If you have

forgotten to set a time your VDO computer will display COUNTDOWN

ERROR.

LAP TIMER: Start Lap Timer with ∫ . Start next Lap with ≈ + ¥ at the

same time at any point of the training unit. The following values will

be saved:

- Duration of the lap

- Average heart rate on the lap

- Average speed on the lap

The lap values can be called at any time if time measurement is

stopped.