User's Manual

www.vdocyclecomputing.com X3DW 45
DGBFI
ALARM/SET OK? Confirm with
M
.
The display confirms: ALARM/SET DONE.
Automatic return to SETTINGS/SELECT.
If you have set the alarm to ON, the alarm symbol
appears on the bottom left of the display
-Symbol.
ALARM...SET HOUR/CONTINUE
Set the hours using up/down.
Confirm the hour setting
with
M
.
ALARM...SET MINUTES/
CONTINUE. Set the minutes
using . Confirm the minutes
setting with
M
.
You can program the values on the distance coun-
ter at any time (e.g. at the end of a season).
Using go to SETTINGS/
SELECT. Confirm with
M
.
You are now in setting mode
(pressing
C
for 3 seconds gets
you back to function mode).
Using go to ODOMETER/
SET. Confirm with
M
.
ODOMETER/ODO BIKE 1
(use to go to setting for
BIKE 2). Confirm with
M
.
ODO BIKE 1 ...SET DISTANCE/
CONTINUE.
5.4 Setting the total kilometres
You can set the flashing digits
using .
To access the next digit, con-
firm with
M
. Repeat the steps
until the last digit on the right
is flashing. Confirm with
M
.
ODO BIKE 1/SET OK? Confirm with
M
.
The display confirms ODO BIKE 1/SET DONE.
Automatic return to SETTINGS/SELECT.