User's Manual

I F
www.vdocyclecomputing.com X3DW 47
DGB
BIKE SERVICE/BIKE 1
(use to switch to bike 2)
Confirm with
M
.
BIKE 1 ...SET DISTANCE/
CONTINUE. You can set the flash-
ing digits using To access
the next digit, confirm with
M
.
Repeat the steps until the last digit on the right
is flashing. Confirm with
M
.
BIKE 1/SET OK?
Confirm with
M
.
The display confirms: BIKE SERVICE/SET DONE.
Automatic return to SETTINGS/SELECT.
5.7 The navigator
With the VDO navigator you can complete trips
according to Roadbooks. Roadbooks = tour
descriptions with km information for certain
points of orientation. The VDO navigator is an in-
dependent km counter and can count forwards or
backwards. The km status can be set at any desi-
red point. You can therefore start in the middle
of a trip or make a km correction if you have taken
a wrong turn.
Setting the navigator:
Using go to NAVIGATOR/
SELECT. Confirm with
M
.
NAVIGATOR/SET. Confirm with
M
.
You are now in setting mode
(pressing
C
for 3 seconds gets
you back to function mode).
Select NAVIGATOR/FORWARD
or NAVIGATOR/BACKWARD
using .
Confirm with
M
.
NAVIGATOR SET DISTANCE/
CONTINUE. The flashing digit is
ready to be set.
Using set the digits.