User's Manual

X3DW VDO CYCLECOMPUTING48
F IGB
In Sleep-Modus 2 the wireless receiver is also
switched off. (after 15 min).
The display shows SLEEP
MODE/PRESS BUTTON
Before continuing to ride,
you must press a button to
switch the receiver back on.
The display for the speed and
the cadence flashes.
NAVIGATOR/SET
Using switch to
NAVIGATOR/RESET.
Confirm with
M
.
Security question: NAVIGATOR/RESET?
Confirm with
M
.
NAVIGATOR/SET DONE appears briefly and your
VDO computer automatically returns to the NAVI-
GATOR/SELECT start menu.
Access next digit with
M
. Repeat steps until last
digit is flashing. Confirm with
M
.
NAVIGATOR/SET OK? Confirm with
M
.
NAVIGATOR/SET DONE appears as confirmation
and your VDO computer automatically returns to
the NAVIGATOR/SELECT menu.
Note: The navigator always runs automatically
at the same time, even if you have not set it.
Set navigator back to zero:
Using go to NAVIGATOR/
SELECT. Confirm with
M
.
5.8 Sleep mode
Your VDO computer is equipped with a two-fold
sleep mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time, service interval
display and the -symbol (if a timing function is
running) continue to be displayed.
Sleep mode 1 switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode 1 is ended when speed impulses
are processed again (when cycling) or a button
is pressed.
D