User's Manual

X3DW VDO CYCLECOMPUTING50
D GB F I
5. COUNTDOWN
You can program a time, and the timer counts back-
wards from this time. At the end of the
COUNTDOWN time a single beep is heard.
6. TIME TRIAL
On the TIME TRIAL timer, a distance can be set (time
trial distance). Whilst cycling, the expected ride
time, based on the average speed and the distance
still to be cycled, is constantly shown alternately on
the display.
7. LAP TIMER
The lap timer can store 30 laps.
For every lap, the following is saved:
B
Time
B
Distance
B
Average
The next lap can be started either manually or
automatically.
For the automatic start, a distance is preset. Once
this distance has been cycled, the next lap is started
automatically.
Your VDO computer has 7 different timing functions.
When one of the timing functions is running, the
symbol always flashes at the bottom left of the
display. You can only activate one timing function
from the 7 available at any one time. The setting/
measuring range for all timing functions is 0:00:00 h
to 24:00:00 h.
1. STOPWATCH
Manual stopwatch for measuring the ride time
for certain route sections.
2. TIMER1
You can program a time, e.g. for interval training.
TIMER1 counts forwards from zero. At the end of
TIMER1 a single beep is heard. TIMER1 starts again
until you stop it.
3. TIMER2
You can program a time, e.g. for the rest period
during interval training. TIMER2 counts forwards
from zero. At the end of TIMER2 a double beep is
heard. TIMER2 starts again until you stop it.
4. TIMER1+2
With this function, first TIMER1, then TIMER2 run
alternately. At the end of TIMER1 a single beep is
heard and TIMER2 starts to run automatically.
At the end of TIMER2 a double beep is heard.
TIMER1+2 keeps running until you stop this function
or until the set number of repeats has expired.
6. Timer functions