User's Guide

Fly6 CE603 User Guide Page 22 of 34
Bike Alarm
The Fly6 bike alarm can be armed via the CycliqPlus mobile app. If your Fly6 is moved whilst it is armed (including if your bike is moved with
the Fly6 attached), it will sound an alarm, the tail light will begin to pulse and the camera will start recording. You will also receive an alert and
alarm notification on your smartphone if you are in Bluetooth range.
The bike alarm can be turned off (if you are in Bluetooth range) via the CycliqPlus mobile app.
Manual over-ride of bike alarm
If the alarm is active but cannot be stopped, press both the power button and Q button until the alarm stops. This normally takes around eight
seconds.
Idle Mode
Idle Mode is intended to assist with battery management. If this mode is active, the Fly6 will turn off automatically after sensing no movement
for 15 minutes. You can turn the Fly6 back on as you normally would when you return to using it.
Idle Mode can be enabled and disabled via the CycliqPlus app. The default setting is disabled.
CAUTION
Cycliq recommends familiarising yourself carefully with this function before using it as this function can prevent your ride from being recorded.
Idle mode should only be used with an audible alert setting of 3, 5, or 10 minutes so you are aware if your Fly6 has turned off.
Durability
The Fly6 has been designed for all-weather use and is water and dust resistant. You should still take care to ensure the Fly6 port cover is firmly
and correctly sealed before use.