TRANSPONDER IMMOBILISER USER INSTRUCTIONS CYCL PS VEHICLE SOLUTIONS PROUDLY AUSTRALIAN
TRANSPONDER IMMOBILISER Security System CYCL PS VEHICLE SOLUTIONS CYCLOPS PARALYSER 205 User Instructions Congratulations on having one of the world's most advanced and unique Australian designed and engineered vehicle security systems, installed in your vehicle! The Cyclops Paralyser 205 has been tested to and meets Australian Standards 4601:1999.
DISARMING To disarm the P205, simply switch on the vehicle's engine. The small transponder tag attached to your key chain will come in close proximity to the receiver antenna located below the ignition switch. The P205 will decode the signal from the tag and disarm. The red status LED will extinguish and the engine can be started. If the engine is not started within 39 seconds the P205 will automatically re-arm. ARMING The P205 will automatically arm within 39 seconds of the ignition being switched off.
OVERRIDE The system can be overridden by means of a Personal Identification Number (PIN). Every unit is supplied with its own PIN. It is important to make a note of this PIN or keep the card supplied with the unit in a safe p1ace as it also has the PIN detailed on it. ** Any digit marked '0', indicates 10 flashes. OVERRIDE PROCEDURE ! Insert the ignition key into the ignition switch and turn to the ON position. The red status LED mounted on the dash will glow constantly.
PROBLEM SOLVING System won't disarm (LED won't flash or extinguish) ! Make sure that ignition switch is in the OFF position. ! Make sure the vehicle battery is not flat. ! Try your spare transponder tag. ! Use PIN to over-ride and contact you nearest Cyclops service centre.
ANNUAL INSPECTION Dynamco prides itself on the durability and integrity of its car security systems. We welcome users to contact a Cyclops service centre every twelve months for an annual inspection.
WARRANTY Subject to the conditions stated below, to be free from manufacturing defects and faulty material within the warranty period stated below. CONDITIONS ! That the warranty registration has been completed in full at the time of purchase and / or installation and is produced when warranty service is sought.
WARRANTY REGISTRATION PURCHASED FROM OWNER’S NAME TYPE OF VEHICLE VEHICLE REGO MODEL OF UNIT DATE OF INSTALL’ WARRANTY PERIOD : CONTROL MODULE TRANSPONDERS AFTER HOURS EMERGENCY PHONE