Installation Guide

7Cyclone Undermount Installation - English
UNDERMOUNT INSTALLATION - PARTS SUPPLIED
1 × Hood
Rectangular Opening Models ONLY:
1 × Rectangular Damper
All Units Except NA330R, NA830R,
NA430R, CLN30:
2 × Round Oil Saucers
CYS1000R ONLY:
1 × Round Oil Saucer
INCLUDED IN UNIT
CYS1000R, CY1011R/
CLC11:
2 × Halogen Lights
(20W per bulb)
HARDWARE PACKAGE
4 × Mounting Screws
All Units Except NA330R,
NA830R, NA430R, CLN30:
2 × Rectangular Oil Cups
CYS1000R ONLY:
1 × Rectangular Oil Cups
Rectangular Opening Models ONLY:
6 × Damper Screws
PRE-INSTALLED
NA330R, NA830R, NA430R,
CLN30:
2 × LED Lights
(1.5W per bulb)
*Bulb & socket may change.
UNDERMOUNT INSTALLATION - TOOLS AND MATERIALS
REQUIRED
• Electrical drill or ratchet driver
• Phillips screwdriver #2 or driver bit
• Straight blade screwdriver
• Wire stripper or cutter
• Tape measure
• Electrical supplies for wiring (i.e. marrets,
electrical tape)
• Aluminum foil tape and/or duct tape
• Hammer
• Jigsaw or saber saw
• Step ladder
CY3000R ONLY:
2 × Insertable Oil Cups
NA330R, NA830R,
NA430R, CLN30 ONLY:
1 × Oil Collector
INCLUDED IN UNIT
CY3000R ONLY:
2 × Dimmable LED Lights
(1W per bulb)