Pre-Delivery/Install Checklist

* Electrical Drill or Ratchet Driver * Aluminum Foil Tape and/ or

* #2 Phillips Screwdriver or Driver Bit Duct Tape

* Straight Blade Screwdriver *Hammer

* Wire Stripper or Cutter *Jigsaw or Saber Saw

* Tape Measure *Step Ladder

*Electrical Supplies for Wiring (i.e Marrettes & Electrical Tape)

1X Hood 1x Rectangular Damper

Rectangular Vent Opening Models Only

GREASE COLLECTION

All units except for NA330R

2x Rectangular oil cups

CYS Only:

1x Rectangular oil cup

CY3000R Only:

2x Insertable oil cups

1x Round oil saucer

All units except for NA330R

2x Round oil saucers

CYS Only:

UNDER MOUNT INSTALLATION

TOOLS AND MATERIALS REQUIRED

UNDER MOUNT PARTS SUPPLIED

PAGE 1
UNDER MOUNT INSTALLATION TOOLS AND MATERIALS REQUIRED * Electrical Drill or Ratchet Driver * Aluminum Foil Tape and/ or * #2 Phillips Screwdriver or Driver Bit Duct Tape * Straight Blade Screwdriver *Hammer * Wire Stripper or Cutter *Jigsaw or Saber Saw * Tape Measure *Step Ladder *Electrical Supplies for Wiring (i.
PAGE 2
NA330R Only 1x Oil collection tray LIGHTING CYS & CY1011R 2x Halogen bulbs 20W per bulb CY3000R Only 2x Dimmable LED Lights 1W per bulb NA330R Pre-installed 2x LED lights 1.5W per bulb *Bulb and socket may change HARDWARE PACKAGE 4x Mounting Screws Rectangular opening models only: 6x Damper Screws Cyclone Range Hoods Inc. www.CycloneRangeHoods.com Info@CycloneRangeHoods.