Pre-Delivery/Install Checklist

* Electrical Drill or Ratchet Driver

* Electrical Supplies for Wiring

* 1/2" Drill Bit for Drilling Pilot Holes (i.e Marrettes and electrical tape)

* 1- 1/4" Drill Bit for Drilling Electrical Wiring * Hammer

Access Hole (if applicable)

* Jigsaw or Saber Saw

* #2 Phillips Screwdriver or Driver Bit * Drywall Stud (If applicable)

* Wire Stripper or Cutter * Step Ladder

* Tape Measure * Stud Finder

* Aluminum Foil Tape and/ or Duct Tape * Level

1x Hood 1x Round Adaptor 1x Chimney flue 1x Upper

(May be Pre- installed) (Top and Bottom) Mounting Bracket

1x Plastic Adaptor Seal

Island and Wall Mount Installation

TOOLS AND MATERIALS REQUIRED

Island and Wall Mount Installation- Parts Supplied

PAGE 1
Island and Wall Mount Installation TOOLS AND MATERIALS REQUIRED * Electrical Drill or Ratchet Driver * 1/2" Drill Bit for Drilling Pilot Holes * 1- 1/4" Drill Bit for Drilling Electrical Wiring Access Hole (if applicable) * #2 Phillips Screwdriver or Driver Bit * Wire Stripper or Cutter * Tape Measure * Aluminum Foil Tape and/ or Duct Tape * Electrical Supplies for Wiring (i.
PAGE 2
Grease Collection and Lighting 1x Oil Cup Pre- Installed 2 or 4x LED Puck Lights (1.5 W per bulb) *Bulb and socket may change HARDWARE PACKAGE 4x Mounting Screws (2x Long and 2x Medium) 4x Drywall Anchors (2x Large and 2x Small) 2x Top Chimney Screws 2x Bottom Chimney screws (For Pyramid Shaped Hoods Only) Cyclone Range Hoods Inc. www.CycloneRangeHoods.com Info@CycloneRangeHoods.