Use and Care Manual

USE AND CARE GUIDE
MODELS
NA940D
OPERATION INSTRUCTIONS
tubing into convenient easily-removable grease cups for hassle-free, environmentally-friendly
cleaning. Simply remove the cups when grease builds up and clean them in the top rack of
your dishwasher.
Tip: Soak all parts in soapy water if there is heavy grease.
Fan Operation
Fan Speeds: In this dual-fan unit, each fan can be controlled independently of the other with
HIGH and LOW speed settings using the corresponding left and right rocker switches located
on the front of the machine.
Lights: A third rocker switch turns the light ON and OFF.
Energy Saving Tip: If you are cooking on one side of the stove, turn the same side on HIGH
while running the other fan on LOW
FAN CONTROL
Grease Disposal
Slide lamp cover to the right and replace light bulb.
MAINTENANCE
Fan Blades: Fill a spray bottle with a mixture of dishwasher soap and water and spray into
the fan blades while the machine is running. The soapy water will run the same path through
the machine as the grease, effectively cleaning all of its internal components. The cleaning
solution will be dispensed in the grease traps for convenient, hassle-free disposal.
Exterior: The exterior of the machine can be maintained by wiping the surface area. Use a
stainless steel cleaner and a very gentle cloth for stainless steel machines. A gentle cleaning
agent, such as Windex, and a damp cloth can be used to wipe and buff machines with colored
Fan Guard: To clean fan guard, unscrew two screws from the side of the fan guard, then soak
and hand-wash with dish soap.
Cleaning
HIGH
LOW
LIGHT
CONTROL
WARNING! Do not remove grease cups immediately after cooking or if grease is still hot.
WARNING! Ensure that all power leading to your range hood has been disconnected
before disassembling any parts.
Changing Light bulbs
WARNING! Ensure that all power leading to your range hood has been disconnected
before changing bulbs. As well, ensure that lights have fully cooled before changing bulbs.