Instruction Manual

Auxiliary Lens Adapter for

FujiFilm FinePix Real3D W1

Enables the use of 37mm lens hoods,

wide-angle or ﬁsh-eye lenses

with the Fuji W3!

Cyclopital3D

The Cyclopital3D Auxiliary Lens Adapter allows you to use wide angle

or fish eye auxiliary lenses with your Fuji W3 or W1.

3D photos shot with a wide field of view can produce interesting

results. The functionality is particularly useful when you can't back up

enough to get everyone or everything in the picture. For example, the

two photos below were taken with the tripod in the same location, the

1st with the stock Fuji W3 and the 2nd with fish-eye lenses attached to

the Cyclpital3D Auxiliary Lens Adapter:

Benefits and Features:

• 37mm lens rings enables use with wide-angle and fish-eye lenses

• Hot shoe mount, PC port & trigger for external flash

• Tripod mount

• Convenient hand grip is easy to hold

• Neck-strap anchors fit 3/8” or 10mm strap width

• Built in spirit level

• Precision laser alignment

PAGE 1
Cyclopital3D Auxiliary Lens Adapter for FujiFilm FinePix Real3D W1 The Cyclopital3D Auxiliary Lens Adapter allows you to use wide angle or fish eye auxiliary lenses with your Fuji W3 or W1. 3D photos shot with a wide field of view can produce interesting results. The functionality is particularly useful when you can't back up enough to get everyone or everything in the picture.
PAGE 2
Expand the PotenƟal of your Fuji W3! Instructions for use: 1. Slide lens cover open. Close-up/ Macro Adapter 2. Insert camera into adapter. 3. Attach to camera by inserting thumb screw into the tripod mount. Decreases stereo base to 25mm! 4. Turning your camera on (and off). If the camera is off, press and hold the “play” button in the middle of the control panel. The camera will power up in playback mode, switch to camera mode by half pressing the shutter button.