PARALYSER 375 URIT EC Y S USER INSTRUCTIONS S Y S CYCL PS STEM Proudly designed and engineered in Australia by Dynamco Pty Ltd.
S CYCL PS S Y User Instructions S CYCLOPS PARALYSER 375 URIT EC Y Immobiliser Vehicle Security System STEM Congratulations on having one of the world's most advanced and unique Australian designed and engineered vehicle security systems, installed in your vehicle! The Cyclops Paralyser 375 has been tested to and meets Australian Standards 4601:1999.
ARMING AND DISARMING To arm or disarm the system, press the larger button on the remote control. Arming the system is accompanied by two flashes from the indicators and one flash for disarming. If the siren confirmation option is enabled the P375 will also “chirp” the siren twice for arming and once for disarming. PANIC If the larger button on the remote control is pressed and held down for more than two seconds the system will go into a panic mode.
INTRUSION DETECTION The P375 is equipped with four zones of protection doors, bonnet, glass breakage & auxiliary. Each zone can be triggered a maximum of three times after arming. When a zone is triggered, the siren will sound for 30 seconds and the indicators will flash for one minute. The siren will reset for five seconds after each 30-second trigger period before sounding due to subsequent triggers. When the P375 has auto armed (immobilised), all zones (except ignition) will not trigger the siren.
GLASS BREAKAGE PROTECTION The P375 is equipped with a sophisticated glass breakage detection unit. The system will only respond to the breaking of any glass in the vehicle. To test the unit simply wind up all the windows and arm the P375. Wait 30 seconds before tapping the driver's side window with a metal object such as a coin. The siren and indicators will sound and flash. You should notice that there should be no trigger, regardless of how hard you hit the window or body of the vehicle with your hand.
OPTIONS The following list details how many times you need to turn the ignition on to achieve the desired change IGNITION SWITCH TURNS 1 FLASH 3FLASHES 3 Anti Hi Jack Disabled Enabled 9 auto-lock/dome light Auto-lock Dome light 11 Horn output type Pulsed Constant 13 Arm/disarm confirmation Disabled Enabled 15 Indicator disarm flash 1 second 10 seconds SPECIFICATIONS Manufactured by : Dynamco Pty Ltd. Model Number : Paralyser 375. Standards met : AS/NZS 4601:1999. Supply voltage : +12VDC.
BATTERY REPLACEMENT Using a small Phillips-head screwdriver, remove the three screws at the back of the remote and carefully separate the two body housings taking take care not to disturb the circuit board. Remove the old battery whilst paying attention to the orientation of the positive and negative terminals. Insert new battery in identical fashion to the original and re-assemble remote. Replace screws and test remote control by pressing main button.
OVERRIDE The system can be overridden by means of a Personal Identification Number (PIN). Every unit is supplied with its own PIN. It is important to make a note of this PIN or keep the card supplied with the unit in a safe p1ace as it also has the PIN detailed on it. ** Any digit marked '0', indicates 10 flashes. OVERRIDE PROCEDURE !Insert the ignition key into the ignition switch and turn to the ON position. The red status LED mounted on the dash will glow constantly.
PROBLEM SOLVING System won't activate when the door is opened - Make sure you have used the remote to set the system. It will not trigger if the system has auto armed. - Make certain the system is activated. LED should be flashing on the dashboard. - Make sure that the interior dome light has not been left in the permanently ON position. - Make sure that you have allowed at least 10 seconds after setting the system, before opening the door. System won't activate or deactivate.
ANNUAL INSPECTION Dynamco prides itself on the durability and integrity of its car security systems. We welcome users to contact a Cyclops service centre every twelve months for an annual inspection.
WARRANTY Subject to the conditions stated below, to be free from manufacturing defects and faulty material within the warranty period stated below. CONDITIONS !That the warranty registration has been completed in full at the time of purchase and / or installation and is produced when warranty service is sought.
REMOTES & SIREN AFTER HOURS EMERGENCY PHONE S Y S CYCL PS S PURCHASED FROM OWNER’S NAME TYPE OF VEHICLE VEHICLE REGO MODULE OF UNIT DATE OF INSTALL’ WARRANTY PERIOD : CONTROL MODULE URIT EC Y WARRANTY REGISTRATION STEM