Owner`s manual

Charging the battery
2
- Battery notes
The unit automatically detects connection and
displays a message “Mass storage mode. The unit
will link to the PC. Would you like to connect to
the PC directly?”.
Click ”No” to start charging the battery.
System will start charging the battery as displayed
on the main menu screen.
Please fully charge the battery without any
interruption.
3
To stop charging the battery via USB, just
disconnect the USB cable from the PC. Then the
system will shut down immediately after the
disconnection. Turn on the unit by pressing the
Power key for 3 seconds to start again.
4
The link involves several steps as shown below.
Connect your unit to a USB port on your PC using the
cable that came with your unit.
You can find the USB port at the right side of the unit.
1
USB Cable
Before you start
Before you start
16
The DC adaptor included in the box will charge the
battery most efficiently.
When your unit is being charged with the DC adaptor,
the battery icon will appear.
DC adaptor
The USB port is used to link the unit directly to a
personal computer.
You can also charge your battery through the USB
port in the unit.
2