Owner`s manual

SYSTEM UPDATE - Software Update

1) To start with the OS update for the device, connect your unit to the DC adaptor

and prepare the SD card with a backup data or an update program.

2) For safe and clear installation, please check that the data is stored in a correct

manner in the SD card.

―_SWUP_‖ and ―_OSUP_‖ folders should exist as the root directory of your SD

card.

The Root directory name of the SD card should be as shown below.

NOTE:

Do not disconnect the DC adaptor while you are trying to update the OS and

Software. If the cable is disconnected, then the computer memory may be lost.

Therefore, take extra caution during installation to avoid a short circuit.

4) After inserting the SD card to slot,

tap „SETTING‟ -> tap „UPDATE‘

3) Please insert the SD card that contains backup data or the update program .

As shown below, you can find the SD slot at the bottom of the device.

Update