Owner`s manual

1. Clean the area where your unit is to be installed with rubbing alcohol and soft

cloth. Allow to dry.

2. Push the pedestal suction cup firmly

onto the connector and then flip the A

lever down to secure the suction cup.

3. Use the B knob to adjust

the angle and rotation of the

pedestal for maximum

visibility.

4. Attach the cradle onto the suction

cup.

5. Place your device in the cradle.

Press the front surface of the

cradle toward the mount until it

clicks. The unit is now fixed in the

cradle.

6. Insert the power adapter into the

cigarette jack and connect it to

the DC input of the navigation

cradle to turn on the power.

Installation

Before you start

Installing on Dashboard

This unit is designed to be installed on dashboard or windshield found in every

vehicle. Please install your unit in a safe manner.

NOTE: It is the end-users‟ responsibility to install and operate this unit in a manner

accordance to the local, state and federal laws.

DC Car Adaptor