Installation Instructions Chapter 5

CG 2400 User Guide
34
Other Hardware Installation
Options
You can expand your CG 2400 system by adding
handsets. You can also configure a base station to
share a phone line with your PC’s fax/modem card.
Subscribing Additional
Handsets
Your system comes with one handset, but additional
handsets can be purchased. The system will support
up to 10 handsets.
See “Subscribing a Handset to the Base Station” on
page76 for procedures.
Using Your Handset with Other
DA 202 BaseStations
The handset that comes with your system is pre-
subscribed to the base station it came with. However,
if you use more than one base station, you can also
subscribe it to multiple base stations.
You can use the same handset with your base station
at the office and the base station at home.
See “Base Stations and Your Handset” on page166
for how to use additional base stations.
Sharing a Base Station Line
with a Modem
If you want to share your base station’s Line 1 with a
modem, you need to configure both the hardware
and software to support it.
This option is available only for Line 1.
Chapter 2: Installation
35
To configure your system to support a fax/
modem on Line 1:
1. Connect one end of a phone cable (not included)
to the fax/modem socket on the bottom of your
base station, and the other end to the Line socket
on your fax/modem.
2. Right-click the
button in the Windows
system tray to open the
CyberGenie rollup
menu.
3. Select Configuration.
The Configuration
application window will
open.
Optional fax/modem socket