Product Info Chapter 7

CG 2400 User Guide
134
2. Press to send the call. You will hear a dial
tone, then hear the number dialing.
3. Press to end the call. The call’s duration will
show for a few seconds before the handset
display returns to idle mode.
To place an external call with CyberGenie:
1. Access CyberGenie by pressing on the
handset. CyberGenie responds: Who would you
like to call?
2. If CyberGenie is unsure whether it has made an
exact match, it will repeat the name and ask for
confirmation. (If CyberGenie is confident in the
match, this step will be skipped.) If CyberGenie
asks for a confirmation:
3. Press to end the call. The call’s duration will
show briefly before the handset display returns to
idle.
To specify a number other than the contact
list default:
1. Access CyberGenie by pressing on the
handset. CyberGenie responds: Who would you
like to call?
2. If CyberGenie is unsure whether it has made an
exact match, it will repeat the name and ask for
confirmation. (If CyberGenie is confident in the
VOICE (SA Y) KEY OPTION D ESCRIPTION
[CON TACT NAME] CYBERGENIE LOOKS TO THE
CONTACTS DATABASE
VOICE (SA Y) KEY OPTION D ESCRIPTION
YES
1
CYBERGENIE WILL DIAL THE NUMBER
NO 2 CYBERGENIE WILL TRY AGAIN
VOICE (SA Y) KEY OPTION D ESCRIPTION
[CON TACT N AME]
AT [LOC ATION]
CYBERGENIE LOOKS TO THE
CONTACTS DATABASE FOR THE
CONTACT’S WORK, HOME, OR CELL
NUMBER BASED ON YOUR REQUEST
Chapter 7: Calls from the Handset
135
match, this step will be skipped.) If CyberGenie
asks for a confirmation:
3. Press to end the call. The call’s duration will
show briefly before the handset display returns to
idle.
Placing an Internal Call
The CG 2400 system supports up to 10 handsets. If
additional handsets are subscribed to the base
station and assigned to users, a user can dial another
user with a handset directly.
When a user record is set up, an extension number is
assigned. (See “Setting up a New User” on page80.)
When a handset is assigned to a user, the user’s
name and extension number show on the handset
display when no call activity is in progress on that
handset.
NOTE: Handsets are
easily assigned or
unassigned for different
users from the PC. For
procedures, see
“Assigning a Handset to
a User” on page77.
To place an internal call:
Pre-dial the extension and press to send the call,
or
1. Press to activate the menu.
2. Select >IntCall.
3. Enter the user’s extension number.
4. Press to end the call.
To place an internal call using CyberGenie:
1. Access CyberGenie by pressing on the
handset. CyberGenie responds: Who would you
like to call?
VOICE (SAY) KEY OPTION DESCRIPTION
Y ES 1 CYBERGENIE WILL DIAL THE NUMBER
N O
2
CYBERGENIE WILL TRY AGAIN
VOICE (SAY) KEY OPTION DESCRIPTION
[USER NAME] CYBERGENIE LOOKS TO THE USER
DATABASE