Chapter 8 Handset Customization What Can Be Customized You can uniquely configure your handset for a variety of customized settings and functions, as well as view information using the handset keys.
specific to that handset, regardless of which user is assigned. Some handset information and settings are available using a series of menus from the handset. Other settings can optionally be made using the handset keys directly. Navigating the Handset Menus Menus on the handset are accessed by using the keys. Setting changes that have been confirmed with the key remain stored in the handset memory, even when the handset is switched off. Changes that have not been confirmed are canceled.
Turning Off the Ringer and Warning Sounds 3. Select the call type: Internal , External , CallBack, Message , or Page. 4. Use to select between Low, Medium, High, Mixed, or Melody 1 through 6. As you move through the options, you hear each play. Press to confirm selection. Repeat this process until all call types are set to the preferred melodies. If your handset rings or sounds a warning at an inconvenient moment, such as an alarm signal indicating the batteries are low, you can turn off the sound.
Other Settings handset menu language. An accidental choice could lead to Changing the Display Light and Contrast difficulty understanding the prompts. If this A back light illuminates the handset display when a key is pressed, during an incoming call, or when the handset is placed into its charger. The display light automatically shuts down after 15 seconds if the handset is not in use. You can adjust the display light to one of eight levels of contrast for easier viewing.
Additional Handset Features Automatic Answering Muting the Handset Microphone When a headset is attached to your handset, you can set your handset to answer incoming calls automatically. This allows full hands-free operation. During a call, you may want to speak with a person within range of the handset without the caller hearing the conversation. When automatic answering is on and a call comes in, a one-second beep sounds in the audio accessory, and the ringer sounds as well.
NOTE: If the battery in the monitor handset is low, the handset beeps at the speaker handset to warn the user. key, which you can use to If the BabyPhone call is interrupted, the speaker handset will display BabyCallLost Reactivate? , and the warning light stays on continuously. You can press to reestablish the call. When the call is reestablished, you hear a confirmation beep every half a minute from the speaker handset. The information tone can be turned off. 2.
1. When the phone rings, press call. to answer the procedures quickly. If you do not do each keystroke within 2 seconds of the previous one, the direct call number will be dialed. 3. Press now off. OP TIO N D ESC R IPT ION A CCESS C YBERGENIE 2. When CyberGenie responds: to access the menu. 2. Select >DirectCall and press Direct Call? is displayed. K EY C YBERG ENIE To switch the direct call off: 1. Press 1. Press . CyberGenie responds: Who would you like to call? VOIC E (SA Y ) 2.
Viewing the IPEI Code The International Portable Part Equipment Identity (IPEI) code is a unique code assigned to the handset during manufacturing. Changing the Key Lock Status NOTE: Locking the keys does not effect your ability to receive calls. You can use the key lock feature to prevent accidentally pressing a key or making an unintended call. If you forget the handset PIN, you will need the IPEI to reset the PIN code to the default setting.
PIN controls handset access only. The system also uses personal PINs and system PINs to control access to the application. NOTE : If you enter the wrong PIN three consecutive times, the handset blocks. To unblock the handset, see below. 1. Press menu. to access and move through the 2. Select Handset>PhoneLock>ChangePIN and press . 3. EnterOldPIN displays. Enter the current PIN code for the handset and press .
Base Stations and Your Handset • You can view or change base station information through the handset menu. Options include: • Selecting a different base station for handset subscription. • Renaming a base station. • Deleting (unsubscribing) a handset from a base station. • Re-subscribing a handset to a base station. (This option would be used only if your handset is unsubscribed from the base station from the computer but not from the handset, and you want to subscribe it back to the base station.
NOTE: A base station name change shows up only on the handset in which it is entered. It does not affect other handsets or the application. 1. Press menu. NOTE : Multiple base stations may overlap to access and move through the 2. Select >BaseStation>Rename and press coverage. When the . 3. A list of base stations displays. Select the base station name to be edited, then press . • Press to delete the old name, one character at a time.
CG 2400 Use r Guide Default Handset Settings If you return the handset to default settings, you will clear: • All customized handset settings (such as custom melody rings) • Most recently dialed numbers • Call statistics To return to default handset settings: 1. Press menu. to access and move through the 2. Select >Handset>MasterReset and press . 3. ENTERPIN or Reset All Settings? appears. If requested, enter the PIN code for the handset (the default is 0000). 4. Press 170 to confirm.
Chapter 8 Handset Customization What Can Be Customized You can uniquely configure your handset for a variety of customized settings and functions, as well as view information using the handset keys.
specific to that handset, regardless of which user is assigned. Some handset information and settings are available using a series of menus from the handset. Other settings can optionally be made using the handset keys directly. Navigating the Handset Menus Menus on the handset are accessed by using the keys. Setting changes that have been confirmed with the key remain stored in the handset memory, even when the handset is switched off. Changes that have not been confirmed are canceled.
Turning Off the Ringer and Warning Sounds 3. Select the call type: Internal , External , CallBack, Message , or Page. 4. Use to select between Low, Medium, High, Mixed, or Melody 1 through 6. As you move through the options, you hear each play. Press to confirm selection. Repeat this process until all call types are set to the preferred melodies. If your handset rings or sounds a warning at an inconvenient moment, such as an alarm signal indicating the batteries are low, you can turn off the sound.
Other Settings handset menu language. An accidental choice could lead to Changing the Display Light and Contrast difficulty understanding the prompts. If this A back light illuminates the handset display when a key is pressed, during an incoming call, or when the handset is placed into its charger. The display light automatically shuts down after 15 seconds if the handset is not in use. You can adjust the display light to one of eight levels of contrast for easier viewing.
Additional Handset Features Automatic Answering Muting the Handset Microphone When a headset is attached to your handset, you can set your handset to answer incoming calls automatically. This allows full hands-free operation. During a call, you may want to speak with a person within range of the handset without the caller hearing the conversation. When automatic answering is on and a call comes in, a one-second beep sounds in the audio accessory, and the ringer sounds as well.
NOTE: If the battery in the monitor handset is low, the handset beeps at the speaker handset to warn the user. key, which you can use to If the BabyPhone call is interrupted, the speaker handset will display BabyCallLost Reactivate? , and the warning light stays on continuously. You can press to reestablish the call. When the call is reestablished, you hear a confirmation beep every half a minute from the speaker handset. The information tone can be turned off. 2.
1. When the phone rings, press call. to answer the procedures quickly. If you do not do each keystroke within 2 seconds of the previous one, the direct call number will be dialed. 3. Press now off. OP TIO N D ESC R IPT ION A CCESS C YBERGENIE 2. When CyberGenie responds: to access the menu. 2. Select >DirectCall and press Direct Call? is displayed. K EY C YBERG ENIE To switch the direct call off: 1. Press 1. Press . CyberGenie responds: Who would you like to call? VOIC E (SA Y ) 2.
Viewing the IPEI Code The International Portable Part Equipment Identity (IPEI) code is a unique code assigned to the handset during manufacturing. Changing the Key Lock Status NOTE: Locking the keys does not effect your ability to receive calls. You can use the key lock feature to prevent accidentally pressing a key or making an unintended call. If you forget the handset PIN, you will need the IPEI to reset the PIN code to the default setting.
PIN controls handset access only. The system also uses personal PINs and system PINs to control access to the application. NOTE : If you enter the wrong PIN three consecutive times, the handset blocks. To unblock the handset, see below. 1. Press menu. to access and move through the 2. Select Handset>PhoneLock>ChangePIN and press . 3. EnterOldPIN displays. Enter the current PIN code for the handset and press .
Base Stations and Your Handset • You can view or change base station information through the handset menu. Options include: • Selecting a different base station for handset subscription. • Renaming a base station. • Deleting (unsubscribing) a handset from a base station. • Re-subscribing a handset to a base station. (This option would be used only if your handset is unsubscribed from the base station from the computer but not from the handset, and you want to subscribe it back to the base station.
NOTE: A base station name change shows up only on the handset in which it is entered. It does not affect other handsets or the application. 1. Press menu. NOTE : Multiple base stations may overlap to access and move through the 2. Select >BaseStation>Rename and press coverage. When the . 3. A list of base stations displays. Select the base station name to be edited, then press . • Press to delete the old name, one character at a time.
CG 2400 Use r Guide Default Handset Settings If you return the handset to default settings, you will clear: • All customized handset settings (such as custom melody rings) • Most recently dialed numbers • Call statistics To return to default handset settings: 1. Press menu. to access and move through the 2. Select >Handset>MasterReset and press . 3. ENTERPIN or Reset All Settings? appears. If requested, enter the PIN code for the handset (the default is 0000). 4. Press 170 to confirm.