Product Info Chapter 8

CG 2400 User Guide
154
154
Other Settings
Changing the Display Light
and Contrast
A back light illuminates the handset display when a
key is pressed, during an incoming call, or when the
handset is placed into its charger.
The display light automatically shuts down after 15
seconds if the handset is not in use.
You can adjust the display light to one of eight levels
of contrast for easier viewing. You can also turn the
display light off.
To turn the display light on or off:
1. Press to access the menu.
2. Select Handset>Display>Light and press .
3. Select Automatic or Off.
4. Press to confirm selection.
To set the display contrast:
1. Press to access the menu.
2. Select Handset>Display>Contrast and press
.
3. The current setting displays.
4. Use to adjust the contrast. Changes will
show on the handset display.
5. Press to confirm selection.
Changing the Language for the
Handset Menus
The default handset menu language is English, but
two other language options, Spanish and French, are
also available.
Chapter 8: Handset Customization
155
NOTE: Use caution
when changing the
handset menu
language. An accidental
choice could lead to
difficulty understanding
the prompts. If this
happens, reset the
default settings. For
procedures, see
“Default Handset
Settings” on page170.
Changing languages applies only to the handset
menu and does not effect software operation on your
PC.
To change the menu language:
1. Press to access the menu.
2. Select Handset>Language and press .
3. Use to scroll through the list of
languages until the preference is displayed.
4. Press to confirm the choice.
5. Press to exit.
Setting Long Tones for
Interactive Menus
The tones transmitted by the handset may be too
short for some interactive information services. For
example, if you are in a voicemail menu and are
prompted to enter a number to access an option and
cannot successfully access the option, it may be
because the tones transmitted from your handset are
too short to be recognized.
Should this happen, you can increase the length of
the transmitted tones for the duration of the current
call. When this feature is activated, a tone will
transmit for as long as you press the key.
NOTE: This feature can
only be used when a
call is in progress.
To switch to long tones during a call:
1. Press to access the handset menu.
2. Select DialMode>DTMF-Long and press .
To turn off long tones during a call:
1. Press to access the handset menu.
2. Select DialMode>DTMF-Short and press .