Specifications

17
Quick Start
1. Connect the Equipment
a. Connect the Cygnus™ to a mounting pipe with a C-clamp.
b. Connect the safety cable to the mounting pipe.
c. Connect the Cygnus™ to a DMX source with a 5-pin cable
d. Connect to AC power (100 – 240 VAC 50/60Hz)
2. Set DMX Address to 1
a. Press ‘Menu’ until display reads ‘Adr’
b. Press ‘Enter’
c. Press the ‘+’ or ‘-’ keys to select ‘001’
d. Press ‘Enter’ to save setting
3. Set Resolution to 8-bit Mode
a. Press ‘Menu’ until display reads ‘rES’
b. Press ‘Enter’
c. Press the ‘+’ or ‘-’ keys to select ‘8’.
d. Press ‘Enter’ to save setting
4. Set Master Fader Option to ON
a. Press ‘Menu’ until display reads ‘Fdr’
b. Press ‘Enter’
c. Press the ‘+’ or ‘-’ keys to select ‘On’
d. Press ‘Enter’ to save setting
5. Set Video Mode to Off
a. Press ‘Menu’ until display reads ‘HSP’
b. Press ‘Enter’
c. Press the ‘+’ or ‘-’ keys to select ‘OFF’
d. Press ‘Enter’ to save setting
6. Control Cygnus™ with DMX
a. DMX channel 1 controls Red (0 - 100%)
b. DMX channel 2 controls Green (0 - 100%)
c. DMX channel 3 controls Blue (0 - 100%)
d. DMX channel 4 controls Intensity (0 - 100%)
e. DMX channel 5 controls Color Temperature (0-7% is 3500K, 8-100%
is 2000-7500K, see appendix B for values)
f. DMX channel 6 controls Strobe Frequency (8 - 100%)
g. DMX channel 7 controls Strobe Duration (duty cycle) (8 - 100%)
h. DMX channel 8 controls Strobe Effect (color jumping) (8 - 100%)