Specifications

25
Display Messages
Normal Messages
001 – 505! The DMX addresses Cygnus™ will respond to in 8-bit Master mode.
001 – 506! The DMX addresses Cygnus™ will respond to in 8-bit RGBW
mode.
001 – 501! The DMX addresses Cygnus™ will respond to in 16-bit Master
mode.
001 – 502! The DMX addresses Cygnus™ will respond to in 16-bit RGBW
mode.
Adr! Top menu item. Pressing ‘Enter’ here will allow the current DMX
address to be changed.
rES! Second menu item. Pressing ‘Enter’ here will allow the current
resolution to be changed.
Fdr! Third menu item. Pressing ‘Enter’ here will allow the Fader Mode to
be changed.
HSP! Fourth menu item. Pressing ‘Enter” here will allow the Video (High
Speed) Mode to be changed.
rSA! Fifth menu item. Pressing ‘Enter’ here will allow a Run Stand
Alone loop to be run.
PSA! Sixth menu item. Pressing ‘Enter’ here will allow the user to
Program Stand Alone loops.
L1..L3! Cygnus™ will execute Stand Alone loop 1-3 cues.
USr! Cygnus™ will execute the User Stand Alone loop.
Blank! Unit is running, nor error conditions exist, and it has been longer
than 60 seconds since the last button press.