Owner's manual

PRODUCT MANUALPRODUCT MANUAL
3534
TROUBLESHOOTING SPECIFICATIONS
18. TROUBLESHOOTING
Always make sure that you have downloaded and installed the latest drivers and rmware for your
Live Player LP-16. The latest rmware and driver downloads for the LP-16 are available at www.
cymaticaudio.com/downloads
18.1. Standalone Player Mode
Problem Possible Solutions
I do not understand how to create a playlist
to use with my LP-16
Playlists for the LP-16 are created using the external,
Windows compatible LP-16 playlist software. Download
the playlist software and refer to its documentation on
how to create a playlist, then export it to a USB drive
that you connect to your LP-16
My connected USB device is recognized by
the LP-16 and does not pass the device test
when connected.
The connected USB device must be formatted FAT-32.
Format it as FAT-32 on your computer or allow the LP-
16 to format the device
I am playing back a group of stereo les on
the LP-16 and the playback behavior is not
working as expected
From the stereo player menu, select “Playback Mode”
and make sure you have congured the specic
playback mode that corresponds to the playback
behavior you desire
I have manually copied some audio les to
the USB drive I have attached to the LP-16,
but I cannot gure out how to make a playlist
of the les for use with my LP-16
The LP-16s external playlist software is required to
congure a playlist and copy it to an attached USB
drive. See the user’s manual for the external playlist
software for more details
18.2. USB Audio Interface Mode
Problem Possible Solutions
On my Windows PC, the LP-16 is not
recognized by the PC, even though I the
device drivers have been installed and the
device is plugged in using the supplied USB
cable.
Make sure that there is no USB storage device
connected to the front panel USB storage connector of
the LP-16. Doing so will automatically put the LP-16 into
“recorder mode” and it will not be usable as a computer
audio interface at the same time.
When I connect channels 1-2 of the rear-
panel line output to my powered speakers,
the signal is too loud and I have no way to
adjust the listening volume.
The line outputs of the LP-16 do not have a volume
control of their own. To use it with a set of powered
speakers, you can:
1-Connect the outputs to a pair of powered speakers
that have their own onboard volume control
2-Connect the output of the LP-16 to the line inputs of a
small desktop audio mixer or standalone volume control
unit and then connect the outputs of those to your
powered monitors.
I cannot nd the Macintosh OS X version of
the monitor mixer control panel
Currently, no OS X version of the monitor mixer control
panel is available.
19. SPECIFICATIONS
LINE OUTPUTS
Full-scale output 8.2dBu, 2 Vrms
Frequency response ± 0.2 dB, 20 Hz-20 kHz
THD+N @ 0dBFS (1kHz sine wave) -85dB, < 0.005, 20 Hz-20 kHz
THD+N @ -6dBFS < -82dB, < 0.008, 20 Hz-20 kHz
SNR > 100dB, < 0.001%, 20 Hz-20 kHz
Crosstalk < -95 dB, 20 Hz- 20 kHz
HEADPHONES
Full-scale output 8.2dBu, 2 Vrms
OUTPUT
Frequency response ± 0.2 dB, 20 Hz-20 kHz
THD+N @ 0dBFS (1kHz sine wave) -80dB, < 0.005% Vrms, 20 Hz-20 kHz
SNR > 90 dB, 20 Hz-20 kHz
STEREO LINE
Full-scale input Unbalanced, +8.6dBu, 2 Vrms
INPUT
Frequency response ± 0.2 dB, 20 Hz-20 kHz
THD+N @ -1dBFS -73dB, < 0.022% Vrms, 20 Hz-20 kHz
SNR >95dB, A-weighted
20. LEGAL DISCLAIMER
Technical specications and appearance are subject to change without notice and accuracy
is not guaranteed. Cymatic Audio accepts no liability for any loss which may be suffered by
any person who relies either wholly or in part upon any description, photograph or statement
contained herein. Colors and specications may vary from the actual product.
Cymatic Audio products are sold through resellers only. Fulllers and resellers are not agents of
Cymatic Audio and have absolutely no authority to bind Cymatic Audio by any express or implied
undertaking or representation.
Apple Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries. Windows
is a registered trademark of Microsoft Corporation in the United States and other countries. ASIO
is a registered trademark of Steinberg Media Technologies GmbH.
All other trademarks, product names, and company names mentioned in this document are the
property of their respective owners.