Owner's manual

PRODUCT MANUALPRODUCT MANUAL
1514
WORKING WITH USB MEDIA MULTI-TRACK (MT) MODE OPERATIONS AND MENUS
• If the LP-16 determines that the storage device is suitable for playback, a new screen will
appear for a few seconds, displaying the amount of free space available on the attached
drive
After displaying this information for a few seconds, the LP-16 display will switch to the playback
“home screen”.
11.1. Test failed: Wrong le system
If the inserted drive is not formatted in the required FAT32 format, the LP-16 will display an error
message.
Please see the section “Format USB device” to format the attached USB drive in the FAT32
format.
Please keep in mind that formatting the attached USB drive will erase all data currently residing
on the drive.
11.2. Test failed: Disk error
If the inserted drive is defective the screen will give a “Disk Error”
If this occurs, please remove the device and refer to section “Supported USB storage devices”
12. MULTI-TRACK (MT) MODE OPERATIONS AND MENUS
12.1. Multitrack Mode Home Screen
After the attached USB drive has been successfully tested, the LP-16’s screen will display the MT
mode “home screen”.
1
2
3
4
5
6
7
8
11
9
10
1. LP-16 Mode Status
Shows the currently selected playback mode for the LP-16: Multitrack (MT), Stereo (ST), or USB
(USB). When the LP-16 is in USB interface mode, the status message will display “PC” or “MAC”
2. Playback Status
These four animated playback icons move when playback of the current song is active.
3. Playback Mode Icon
This icon displays whether the LP-16 is operating in normal mode ( ) or playlist mode ( ).
4. Remaining time
This number represents the remaining playback time of the currently playing song.
5. Name of Current Playlist
This line displays the name of the currently selected playlist.
6. Number and Name of Current Song
7. Next Song Icon
This icon indicates how the next song will play back relative to the currently playing song:
• There will be no pause between the current and the next song
• The next song will pause until play / footswitch is pressed
• The next song will play after seconds specied in playlist. Can be overruled by play
button / footswitch
8. Name of Next Song in Playlist
This line displays the name of the next song in the playlist, which will play when the current song
is completed.
9. Signal Level Meters (-30dB / -3dB / 0dB)
This group of meters displays the approximate signal strength of the audio tracks that are playing
back.
10. MIDI Input Indicator Light
This circle ashes in time with the data stream of any incoming MIDI signals that are feeding the
MIDI input connector.
11. MIDI Output Indicator Light
This circle ashes in time with the data stream of any outgoing MIDI signals that are sent out of
the MIDI output connector.