User's Manual

2/2020 CY-0090-018, Rev.A Page 19 of 49
Pull the white wire connected to the electrode out of garment until
second wire (blue, black, red) is exposed. Unplug the white electrode
wire. Position a new electrode of the same size (2” x 2” or 2” x 3.5”) so
the black sticky side of electrode is facing up, the attachment side is
facing down, and firmly place within the electrode outlines on the
garment. Plug in the new electrode all of the way so that the metal pin
is completely covered.
Push electrode wire back into garment as far as possible.