User's Manual

2/2020 CY-0090-018, Rev.A Page 23 of 49

Refer to the CyMedica Orthopedics website,

www.cymedicaortho.com for instructions related to the use of e-

vive™ post-operative range of motion knee brace.

5. 3 Ope rat in g t he e-v ive ™ Dev ice fo r NM ES Tre at me nt

All electrodes should be in direct contact with the skin. Turn on the e-

vive™ controller by pressing the power button. When the controller is

turned on, the LED light on the controller will glow white, indicating

that the system is powered on and ready, but is not connected to

Bluetooth.

The e-vive™ controller will turn blue when connected to Bluetooth,

indicating that the mobile app and the mobile device are ready to

deliver a stimulation treatment. The LED light on the e-vive™ controller

will glow yellow when a treatment is in progress and will blink yellow

when the treatment is in progress and is outputting energy.

When the LED light is alternating blue and yellow, the controller is

connected but the treatment is paused. Alternating white and yellow

LED lights mean the controller is not connected to Bluetooth and the

treatment is paused. When powered off, the LED light on the e-vive™

controller will turn off. The controller will be off and will not deliver

treatment. After powering off, wait at least 5 seconds before turning

the controller back on.

If the LED on the controller flashes red contact the CyMedica Customer

Service (refer Section 8.1).