User's Manual

2/2020 CY-0090-018, Rev.A Page 24 of 49
Purple Controller is ON, not in dock
White
Controller is ON and in dock, not connected to
Bluetooth
Blue
Controller is ON, in dock, connected to
Bluetooth
Yellow Treatment in progress, not outputting energy
Yellow blinking Treatment in progress, outputting energy
Yellow/White blinking Treatment paused, not connected to Bluetooth
Yellow/Blue blinking Treatment paused, connected to Bluetooth
Red Battery critically low, needs to charge
Red flashing Failure, call Customer Service
Pairing Your e-vive™ Controller & Smart Device
Important:
You must pair your e-vive™ controller with
your smart device (smart phone or tablet)
before starting a treatment. See section 9.8 for
compatible mobile devices.
Open the e-vive™ app, select Stimulation
Therapy or Range of Motion Test, and follow
the on-screen instructions to pair your smart
device with your controller. Bluetooth must be
enabled on your smart device in order to
connect to the controller. For Android devices,
Location Services must also be enabled for
pairing.