Datasheet

IPS-M12 Series
The -M12 series is The probe uses aIPS suitable for use in a wide range of industrial applications.
piezo-resistive sens , within a stainless steel housingceramic or giving excellent media compatibility
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics ., especially industrial applications.
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration data.
Mating cable and plug assemblies are available - see datasheet M12 Cable Set Series
Accuracy < 0. % ± 25 FS BFSL
Pressure ranges from -1 to 400 bar
M12 4-pin connector
Piezo-resistive thick film ceramic sensor
Stainless steel body
0-5V or 4-20mA output
Performance
Accuracy (Non-Linearity <±0. % / ( )& Hysteresis) 25 FS BFSL
Setting Errors (offsets) 2-wire Zero & Full Scale, <±0.5% / FS
3-wire Zero & Full Scale, <±0.5% / FS
Electrical Protection
Supply reverse polarity No damage/no function
Electromagnetic compatibility CompliantCE
Mechanical Stability
Shock 100g / 11s
Vibration 10g (20 - 2000Hz)RMS
Temperatures & Thermal Effects
Media 4Temperature - 0ºC to +135ºC
Ambient Temperature -20ºC to +80ºC
Storage temperature - 0ºC to +125ºC4
Compensated temperature range +20ºC to +80ºC
Thermal Zero Shift ( ) <±0.04% / /ºCTZS FS
Thermal Span Shift <±0.015% /ºC
Material Specifications
Housing Stainless Steel316L
“O” ring seals Viton
Diaphragm Ceramic Al O 96%
23
Media wetted parts Housing & connection, “O” ring seal,
diaphragm
Weight Approx 100g
Installation position Any
Operational Life > 100x 10 cycles
6
Insulation resistance > 50 hms at 50VdcMO
Environmental protection IP67 (when used with a similarly
rated connector)
Pressure Ranges and Passive mV/V Outputs
Nominal Pressure, Gauge, bar 1 2 5 10 20 50 100 250 400
Compound range bar -0.5 to 0 -0.5 to 2 -1 to 5 -1 to 9 -1 to 19 -1 to 24
Permissible Overpressure bar 2 4 10 20 40 100 200 400 650
Burst Pressure bar 4 5 12 25 50 120 250 500 650
www.cynergy3.com
© 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO 9001 CERTIFIED
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
IPS-M12 2018
Telephone [phone]
Email:[e-mail]
Output Signals and Supply Voltages
Wire system Output Supply Voltage Connection sPin No
2-wire 4-20mA 9-32Vdc +ve Supply -ve Supply GroundPin 1 Pin 2 Earth Pin
3-wire 0-5Vdc -32Vdc +ve Supply -ve Supply9 Pin 1 Pin 2
Output Pin 3 Earth Pin 4
Made in the UK
Industrial Pressure Sensor - Ceramic - with M12 4-Pin Connector