Specifications
14
MAIN MENU 1
ST
LAYER 2
ND
LAYER 3
RD
LAYER
Chromakey
Setup*
Minimum For R 000~255
Maximum For R 000~255
Minimum For G 000~255
Maximum For G 000~255
Minimum For B 000~255
Maximum For B 000~255
Switch On/Off
Menu Exit
Ethernet
Setup
IP Mode Static/DHCP
Static Set IP/Mask/Gate
Byte1 High XXX 000~255
Byte2 XXX 000~255
Byte3 XXX 000~255
Byte4 Low XXX 000~255
Re-Link No/Yes
Exit
Static/DHCP IP LINKED/NOT LINKED
IP IP/Mask/Gate
Mask XXX.XXX.XXX.XXX
Gate XXX.XXX.XXX.XXX
Mac XXX.XXX.XXX.XXX
Sys Reset
Information FWersion
Menu Exit
Note:
1. Chromakey Setup only works when CH 1and CH 2 are selected. CH 1 is the
background and CH 2 is the top layer to be overlaid.
2. The Chromakey function is designed for overlapping twoideo images (such
as news reports, weather forecasts or educationalideos). The background
color of CH 2 is usually a single, solid, color which can be easily removed.
The RGB setting is for the CH 2ideo where the minimum setting gures cannot
be greater than the maximum gures and the maximum gures cannot be
lower than the minimum setting gures.
3. When input 1 or 2 has no source connected a warning message will appear
on the OSD.