SY-401V PC/HD to Video Scan Converter OPERATION MANUAL
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
1. Introduction The SY-401V PC/HD to Video Scan Converter is designed to down scale PC/Component source to an analogue CVBS (NTSC,PAL) signal. Supporting PC resolution up to WUXGA@60hz, this device is ideal for applications with multiple CCTV cameras, as the scaler enables the user to connect new video sources to older displays. Features such as 3D noise reduction, frame rate conversion, adaptive contrast enhancement, and a On Screen Display (OSD) allow for easy adjustment to maximise the output display.
6. Operation Controls and Functions 6.2 Left Panel 6.1 Top Panel PC IN 1 1 PC IN: Connect to the source equipment such as a PC, laptop or digital camera with D-sub 15pin cable (VGA) or adaptor converter cable (Component). 6.3 Right Panel 1 2 1 NTSC/PAL MENU (Hold): Press this button to bring up the On-Screen Display (OSD) which will display the input timing and the output TV format information.
.3 OSD Menu IN 640×480 (Input Timing) OUT NTSC (Output TV System) Press the Menu button once to bring up the OSD and display the input (IN) & Output (OUT) information. NTSC Press the Menu button PAL for 3 seconds to bring up the OSD then press Underscan 1 it repeatedly to move Underscan 2 the OSD cursor to the Overscan Phase Adj. desired selection. Once 0~31 the selection is made, if Full Screen no button is pressed for a few seconds, the display Letterbox Aspect Adj.
. Connection Diagram 6.
. Specifications 9.
CIE-Group Ltd, Widdowson Close, Blenheim Industrial Estate, Bulwell, Nottingham NG6 8WB Tel: +44 (0)115 977 0075 | Fax: +44 (0)115 977 0081 Email: info@cie-group.com www.cie-group.