User Manual

Getting Started With EZ-
www.cypress.com Document No.: 001-96841 Rev. ** 48
Figure 64. CySmart Master Settings Configuration
4. Press the reset or SW1 button on the BLE Pioneer Kit to start the BLE advertisements from your design.
5. In the CySmart application, click the Start Scan button. Your device (BLE Peripheral) name should appear in the
Discovered devices list.
6. Click Stop Scan and then click Connect to establish a BLE connection between the CySmart tool and your device, as
shown in Figure 65 .
Figure 65. Connect with CySmart PC Application