User Manual

Getting Started With EZ-
www.cypress.com Document No.: 001-96841 Rev. ** 54
Appendix C: Code Examples
PSoC Creator includes a large number of code example projects. These
projects are available from the PSoC Creator Start Page, as Figure 69
shows.
Example projects can speed up your design process by starting you off
with a complete design, instead of a blank page. The example projects
also show how PSoC Creator Components can be used for various
applications. Code examples and datasheets are included, as Figure 70
shows.
In the Find Example Project dialog shown in Figure 70, you have several
options:

Filter for examples based on architecture or device family. For EZ-
BLE PRoC Module, use the PRoC BLE filter. Most of the PRoC BLE
example projects can reconfigure to work with the EZ-BLE PRoC
Module.

Select from the menu of examples offered based on the Filter
Options. There are more than 20 BLE example projects for you to get
started, as shown in Figure 70.

Review the datasheet for the selection (on the Documentation tab)

Review the code example for the selection. You can copy and paste
code from this window to your project, which can help speed up code
development.

Or create a new project (and a new workspace if needed) based on
the selection. This can speed up your design process by starting you
off with a complete basic design. You can then adapt that design to
your application.
Figure 69. Code Examples in PSoC Creator
Figure 70. Code Example Projects with Sample Code